Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual Download Page 23

Page: 23 / 90

In the right pane, in the Program name box, ensure that the correct policy
is selected.

Under Applied to, select the computers that you want to uninstall the plug-in
from.

Under Schedule, select when you want to uninstall the plug-in.

(Optional) Click Advanced to check if the computers you selected are available
at the exact time that you scheduled.

Under Extra schedule options, select the options that you want.

Ensure that the policy is enabled.

A green On symbol shows in the top right corner.

Click Save changes.

Upgrading the Deployment plug-in

You can upgrade the Deployment plug-in by using the upgrade policy. This policy
is turned off by default.

The upgrade policy uses filters to determine if an upgrade is necessary. You can
access the filters that are used from the Manage > Filters > Software Filters >
Agent and Plug-in Filters menu.

See

“About Deployment Solution policies”

on page 20.

To upgrade the Deployment plug-in

In the Symantec Management Console, on the Settings menu, click
Agent/Plug-ins > All Agents/Plug-ins.

In the left pane, expand the Agents/Plug-ins > Deployment and Migration
folders.

Click the Deployment Plug-In - Upgrade policy.

In the right pane, in the Program name box, ensure that the correct policy
is selected.

Under Applied to, select the computers that you want to upgrade the plug-in
on.

Under Schedule, select when you want to upgrade the plug-in.

(Optional) Click Advanced to check if the computers you selected are available
at the exact time that you scheduled.

Under Extra schedule options, select the options that you want.

Getting started with Deployment Solution

Upgrading the Deployment plug-in

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1



























































































Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 7.1

Brands by name

Popular brands

Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1, Manual

Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 7.1

Brands by name

Popular brands