Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1, Manual

Page: 60 / 90

Table 5-5
Create Image options
Description Option
The name of the task. This field is not labeled. Name
The name of the image file to create. Each time this task
runs, a new image file is created. Enter a unique name every
time you run this task. Image Name
A description of the image to create. Description
The name of the imaging tool you want to use. The tool is
either Ghost or RapiDeploy. Imaging tool
The type of image you want to create. The type is either a
disk image or a backup image.
See “Deployment image types” on page 52.
Imaging type
Advanced Create Image options
The Advanced option on the Create Image task lets you configure additional
options.
See “About creating an image” on page 59.
You can choose several other options while creating this task.
See “Create Image options” on page 59.
Table 5-6
Advanced Create Image options
Description Option
Determines at what point an image file is split into multiple
files. The maximum size depends on the imaging tool (Ghost
or RapiDeploy). Media
Lets you add command-line options for the imaging tool. Command-line
Lets you create an image using an http:// Web address.
You need to set up the Internet Information Services (IIS)
Manager to get HTTP imaging to work. Otherwise, if you
try to use HTTP with the Create Image task, the job fails
and returns a message that the file could not be created.
HTTP
Imaging computers
Advanced Create Image options
60