Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1, Manual

Page: 63 / 90

Table 5-7
Deploy Image options (continued)
Description Option
The credentials that are needed to join the computer to a
domain. Credentials
Advanced Deploy Image options
The Advanced option on the Deploy Image task lets you configure additional
options.
See “About deploying an image” on page 61.
You can also set up other imaging options for this task.
See “Deploy Image options” on page 62.
Table 5-8 Advanced Deploy Image options
Description Option
Determines what partitions are deployed. You can change
the destination partition size by clicking the partition
number. Partition
Lets you add command-line options for the imaging tool. Command-line
Lets you configure the number of computers to run the task
before the image is multicast. You can change the default
settings.
If the threshold count is 2, there must be at least two client
computers and one master computer before multicasting is
used in this session.
Multicasting is supported only with the RapiDeploy imaging
tool.
Multicasting
Adds the credentials that are needed to deploy an image
that was obtained from an HTTP site. HTTP
Restoring a backup image
The computers that you image are restored to the exact state they were in when
the image was created. A backup disk image can be restored only to the computer
from which it was captured.
63 Imaging computers
Advanced Deploy Image options