Symantec 10521146 - Network Security 7120, Administration Manual

Page: 266 / 392

266 Managing log files
Exporting data
3 In the left pane, under Log & Database Parameters , click this parameter to
display it.
4
In the lower right pane, enter either the IP address or hostname of the node
in which to place the logs.
Note: We recommend that you always use the same name for the software
or appliance node when exporting archived logs, establishing an authorized
public key, or exporting scheduled reports. For example, do not refer to the
software or appliance node by its FQDN in one place, and its IP address in
another.
5
Click Apply .
6 In Apply Changes To , select the node to which to apply the parameter.
7 Click OK to save the changes to this node and close.
Setting User Account for SCP
User Account for SCP indicates the user name that log and database files are
transferred to via SCP.
To configure this parameter
1
Click Configuration > Node > Network Security Parameters .
2 In Select Node , choose the node from the pull-down list, and click OK .
3 In the left pane, under Log & Database Parameters , click this parameter to
display it.
4 In the lower right pane, enter the user name for moving logs to the remote
host.
5 Click Apply .
6 In Apply Changes To , select the node to which to apply the parameter.
7 Click OK to save the changes to this node and close.
Setting Destination Directory for SCP
Destination Directory for SCP indicates the directory on the remote host that log
or database files are transferred to via SCP.
To configure this parameter
1 Click Configuration > Node > Network Security Parameters .
2 In Select Node , choose the node from the pull-down list, and click OK .