Symantec 10521146 - Network Security 7120, Administration Manual

Page: 143 / 392

143 Responding
Setting response actions
3 In Configure Response Action , click Email Notification .
4 Enter a subject, and any of the following optional variables:
■
To : Enter the destination of the email notification.
■
Subject : Enter the subject line of the email notification.
■
Maximum number of email notifications : Enter the number of
notifications you want to send about this event.
■
Delay between email notifications (mins) : Enter the time in minutes
that you want Symantec Network Security to wait before sending
another notification.
5 In Configure Response Action , click OK to save and exit.
6 In Response Rules , click OK to save and exit.
Setting email notification parameters
The Network Security console provides a way to establish automatic notification
response policies to alert you via email under specific conditions. Use the
notification parameters to configure these procedures:
■
Setting From Address
■
Setting Subject Line
■
Setting SMTP Server
■
Setting Hostname Used for Email Notifications
Setting From Address
From Address indicates the email address from which Symantec Network
Security sends email notifications. The default value is
root@localhost
.
To configure this parameter
1 Click Configuration > Node > Network Security Parameters .
2 In Select Node , choose the node from the pull-down list, and click OK .
3 In the left pane, click From Address .
4 In the lower right pane, enter the email address.
5 Click Apply .
6 In Apply Changes To , select the node to which to apply the parameter.
7 Click OK to save the changes to this node and close.