Symantec 10521146 - Network Security 7120, Administration Manual

Page: 100 / 392

100 Populating the topology database
Adding nodes and objects
Adding or editing in-line pairs
The Network Security console provides a way to add and edit in-line pair objects
on a 7100 Series node.
To add or edit an in-line pair
1 On the Devices tab, do one of the following:
■
Right-click the 7100 Series node object, and click Add In-line Pair on
the pop-up menu.
■
Right-click an existing in-line pair object, and click Edit on the pop-up
menu.
2 In Add In-line Pair or Edit In-line Pair , enter a descriptive name.
See “Name” on page 77.
3 In Expected Throughput , click the expected throughput on the pull-down
list.
4 In Pair , click the interface pair on the drop-down list.
The selected interfaces must be cabled for in-line mode. See the Symantec
Network Security 7100 Series Implementation Guide .
5 In Description , enter an optional description of up to 255 characters.
See “Description” on page 77.
6 On the Networks tab, click Add , enter a network IP address in CIDR format,
and click OK .
Enter all networks monitored by this in-line pair.