8
7. USE OF EACH COMPONENT
Insert the key into the main switch to be
“
ON
”
position, and the engine is being started, the speed meter
light, position light, tail light, license plate light are always come on.
y
Hazard warning switch
When the switch is turned to this position as the engine is being started, the front and rear turn
signal lights will flash.
Switch to this position to turn of the front and rear signal hlghts.
y
Electrical starter button
This is a starting motor button (switch) for engine starting.
With the main switch
“
on
”
, press this button while holding the front or rear brake lever will start
the engine.
CAUTION:
y
Release this button immediately after engine has been starter, and never press the button again to
avoid damaging the engine.
y
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
y
Do not use light system. Turn headlight and turn signal light to the “off” position when the engine is
being started.
y
High/low beam switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and beams.
This is for high beam.
This is for low beam.(please turn to low beam riding in city.)
