7
7. USE OF EACH COMPONENT
§
OPERATION OF IGNITION SWITCH
§
“ON” position:
y
Engine can be started in this position.
y
Ignition switch key can not be removed.
“OFF” position:
y
Engine is shut off and can not be started in this position .
y
Ignition switch key can be removed.
§
OPERATION OF STEERING HANDLE LOCK SWITCH
§
“Steering handle lock” position
y
Turn the steering handle to left and insert the key into,
press ignition switch key clockwise and then lightly turn
it to left to the “lock” position.
y
The steering handle is locked in this position.
y
Ignition switch key can be removed.
y
When unlocking, simply turn the key from the “LOCK”
position to the “OFF” position.
§
OPERATION OF FUEL TANK COVER SWITCH
§
“Fill gasoline lock” position
y
Inserted the ignition switch key in the main switch lock.
y
Turn the ignition switch key to the
“
fill gasoline
”
position counter-clockwise.
y
Then, the fuel tank cover can be open. You can fill gasoline in the fuel tank.
CAUTION:
y
Never operate the ignition switch key when the motorcycle is running. To turn the ignition switch
to “OFF” and “LOCK” position will shut off the electrical system and that may result in a dangerous
accident. Therefore, the ignition switch can only be turned off after the motorcycle has been
completely stopped.
y
Always remove the key and be sure to take the key away with you after locking the steering handle
before leaving your motorcycle.
y
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
y
Make sure to take the key away with you before you lock your seat.
§
USE OF BUTTONS
§
CAUTION:
y
Make sure to take the key
away with you before you
lock your seat.
Turn Signal
Switch
Horn Switch
High/low
beam switch
Hazard warning
switch
Electrical starter
button
