Sygonix UH-730 Operating Instructions Manual Download Page 41

Page: 41 / 52

Returns to the main view of the app

Current data transfer rate in KB/s

Current date and time

Live view of the camera

Intercom function; not supported by this camera

Starts and stops manual video recording

Creates an image of the current camera view

Switches to the “Video backup” menu point and the device settings

Switches to full screen mode

C10

Turns the sound on or off; not supported by this camera

C11

Enables the automatic, virtual pan function of the camera

C12

Selection for wall or ceiling mounting; current view, wall mounting

C13

Switches to automatic recording playback mode

C14

Selection of the image view mode of the camera; the options are based on the camera

in use and on the installation site C12

b) General touch control

You can change the camera image on your smartphone with various touch gestures.
• If you make a quick double-tap on the camera image on your smartphone with one finger, the

image will be enlarged to the maximum size or minimised.

• If you touch the display in the area of the camera image with two fingers and pull your fingers

apart, you will enlarge the camera image on your smartphone.

• If you touch the display in the area of the camera image with two fingers and contract your

fingers, you will minimise the camera image on your smartphone.

• If you touch near the camera image on the display with a finger, you can rotate, move, etc. the

camera image by moving the finger on the display.

Summary of Contents for UH-730





















































Search results

Summary of Contents for UH-730

Reviews:

Related manuals for UH-730

Brands by name

Popular brands

Sygonix UH-730, Operating Instructions Manual

Search results

Summary of Contents for UH-730

Reviews:

Related manuals for UH-730

Brands by name

Popular brands