Sygonix UH-730, Operating Instructions Manual

Page: 4 / 52

3. Intended use
The product is used to monitor and protect blind or critical areas (such as entrances, courtyard
entrances, underground garages, staircases).
The camera is only intended to be used with a stabilised direct current of 12 V/DC.
The product is designed for operation indoors and outdoors (IP66).
The video and image data are transmitted to your smartphone or tablet via WLAN or LAN.
Alternatively, these can also be stored directly on a micro SD card (not included in delivery, can
be ordered separately, up to 128 GB).
The operation or programming is done via the app “IP PRO3”. This can be installed on an
Android
TM
-smartphone or tablet or an iPhone or iPad.
For the use, a free account is necessary. It must be created during the initial setup of the app.
There are built-in infrared LEDs for shooting in the dark.
Please bear in mind that it is prohibited by law to observe strangers with a camera without their
knowledge and consent. Always observe the rules and regulations of the country where you
use the camera.
Please observe the safety instructions at all times!
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the instruc-
tions carefully and store them in a safe place. If you pass the product on to a third party, please
hand over these operating instructions as well.
This product complies with statutory, national and European regulations. All company and prod-
uct names are trademarks of their respective owners. All rights reserved.
4