Sygonix UH-730, Operating Instructions Manual

Page: 23 / 52

• The camera is now set up and online.
b) Setting up via WLAN
For the following description, no network cable should be connected to the camera. In
addition, the camera must be in APP mode (status LED (A7) flashes slowly).
If you have already set up the camera, reset it to the factory settings first or go to the
description in chapter “9. e) Adding an already set up camera in the app”.
If you want to set up the camera on Apple iOS, you must first connect your Apple
device to the camera’s Wi-Fi network before starting setup. The Wi-Fi name is “IPC…”
and the password is “11111111”.
• Tap “+” on the app’s home page. .
23