Specialist menu
Page 45/56
Programming instructions for
SYCLOPE EVASION
®
It is possible to define 8 different circuits and to program 20 parameters by circuit. Each
parameter can be defined more than one time.
Each name of circuit has 20 caracts.
If you have selected the « Group » mode or « By circuit » mode, the general mode will be
automatically ignored.
To erase the « circuit » or « group » mode, you must erase all names of circuits defined by
using blank caract.
Circuit n°
2
Name:
01:E01 => Not used
02:E02 => Not used
03:E04 => Not used
04:E00 => Not used
Circuit n°2
Name:
Ciru
01:E01 => Not used
02:E02 => Not used
03:E04 => Not used
04:E00 => Not used
Circuit n°2
Name: *******************
01:E01 => Not used
02:E02 => Not used
03:E04 => Not used
04:E00 => Not used
Circuit n°2
Name: Circuit n°2
01:E01 =>
Not used
*
02:E02 => Not used
03:E04 => Not used
04:E00 => Not used
E00 =>
Not used
**
E06 =>
Temp.
Circuit n°2
Name: Circuit n°2
01:E01 =>
Temp.
*
02:E02 => Not used
03:E04 => Not used
04:E00 => Not used
