Specialist menu
Page 42/56
Programming instructions for
SYCLOPE EVASION
®
The active alarm can be delayed if you select « yes » on the second line. T(on) and T(off) must be
written according to your need.
General function
This option allows you to program a general alarm or a copy of state or a mirror of the working
timers.
This table indicates the general alarms used by each function.
Technical alarm
Fault on sensor
Primary power line off
General alarm
All the alarms
Timer
Relay engaged when the working timer is on.
Relay engaged when the working timer is off.
7)
Analog outputs definition
This procedure allows you to define an analog output as a regulation actuator or as a transfer of the
value of a measured or a computed parameter.
Alarm(s)...:
Delay(s)...:
T(on) (s)..:
T(off) (s).:
Internal relays
RL1:
Temp.
* RL2:pH
RL3:Free Cl. RL4:Not used
RL5:Not used RL6:Not used
Internal relays
RL1:Temp. RL2:pH
RL3:Free Cl. RL4:
Not used
*
RL5:Not used RL6:Not used
E03:
Not used
*
Not used
E21:
General A.
Alarm(s)
E22:
Tech. Al.
* Alarm(s)
E23:
Timer
Recopy
USER MENU
> Technician menu access
Select language
Setting real time clock
Interface management
Printing management
TECNICIAN MENU
> Specialist menu access
Technician code
Working timers
Sensors calibration
Setting points
Technical alarms
Analogue outputs
SPECIALIST MENU
> Specialist code
Analogue inputs definition
Chemical computations
Numerical inputs
Conditioned functions
Relays definition
Analogue outputs definition
SPECIALIST MENU
Specialist code
Analog. inputs definition
Chemical computations
Numerical inputs
Conditioned functions
Relays definition
> Analogue outputs definition
Internal analogical
SA1:
Temp.
* SA2:Not used
SA3:Not used SA4:Not used
SA5:Not used SA6:Not used
Internal analogical
RL1:Temp. RL2:Not used
RL3:Not used RL4:
Not used
*
RL5:Not used RL6:Not used
or
E03:
Not used
*
Not used
E03:
Active Cl.
*
Not used
E03:Active Cl.
Not used
*
E03:Active Cl.
Transfer
*
E03:Active Cl.
Regulation
*
