User menu
Page 22/56
Programming instructions for
SYCLOPE EVASION
®
b)
Relays test
Activation or inactivation of the relays will start or stop the dosing systems. Take all
disposition to prevent any risk of damage.
Impulse signal function cannot be simulated. Only, one impulse could be generated by the
selected relay.
The 3 ways valves will be activated as opened or closed function. After the test, a complete
initialization procedure will be engaged by the controller to reset the actuator in the normal
stop position.
►
Use the keys to engage or disengage the corresponding relay.
(In this example, the relays 1, 2, 4 and 6 are activated and the relays 3 and 5 are stopped).
Case when relay external modules are in use :
►
If only one module is activated…
►
Use the keys and for testing corresponding relay.
(In this example, the internal relays 1, 2, 4 and 6 are activated… the external relays 2, 3, 5,
7 and 8 are also activated and the other ones are not activated.)
►
If all external modules are activated…
USER MENU
> Technician menu access
Select language
Setting real time clock
Interface management
Printing management
Controller maintenance
Software ..... : Vx.xx
USER MENU
Technician menu access
Select language
Setting real time clock
Interface management
Printing management
> Controller maintenance
Software ..... : Vx.xx
USER MENU
TESTS OF THE DEVICE
Light effect diodes
> Relays
Analogical outputs
Infrared sensor
Printer
Modem
H Test des relais
Relais int...:12
-
4
-
6
MENU UTILISATEUR
TESTS DU SYSTEM
Voyants
> Relais
Sorties analogiques
Infrarouge
Imprimante
Modem
Test des relais
Relais int... : 1 2 - 4 - 6
Relais ext. 1 : - 2 3 - 5 - 7 8
MENU UTILISATEUR
TESTS DU SYSTEM
Voyants
> Relais
Sorties analogiques
Infrarouge
Imprimante
Modem
Test des relais
Relais int... : 1 2 - 4 - 6
Relais ext. 1 : - 2 3 - 5 - 7 8
Relais ext. 2 : 1 - 3 - - - - 8
