Display modes and types
Page 15/56
Programming instructions for
SYCLOPE EVASION
®
Press again the key in the numeric selected parameter mode to get out of the graphic
mode.
1)
Symbols and statutes of working
Icons of the statutes bar
Internet communication line activated.
Active timer status. The controller is in « Pause » mode.
CAD 1 status. The selected conditioned parameters are in « Pause » mode.
CAD 2 status. The selected conditioned parameters are in « Pause » mode.
Statutes of an analogue parameter channel
Measured value
Measured real value
Measured value over the displaying range
Measured value under the displaying range
Measured value off (Technical alarm)
Regulation
Treatment stopped
Setting point not programmed
Treatment in pause
No treatment needs
Treatment activated for 42,8% of need
No treatment. Parameter in alarm!
Alarms
High threshold inactivated
High threshold programmed (Threshold = 7,9pH)
High threshold activated
Low threshold inactivated
Low threshold programmed (Threshold = 6,8pH)
Low threshold activated
@
