SYCLOPE electronic HYDRO'Com HYD 7000, Installation And Commissioning Instructions, Page: 8 / 36

Environment and safety procedures Page 8/36
Installation and commissioning instructions manual
Make sure that the chemical sensors used with this device correspond well to the chemicals
used. Refer to the individual technical note of each sensor. Chemistry of water is very
complex, in case of doubt, contact immediately our engineering service or your approved
installer/reseller.
Chemical sensors are sensitive elements using consumable parts. They must be supervised,
maintained and calibrated regularly using specific calibrator systems not-provided with this
equipment. In the event of defect, a surplus possible hazard of chemical injections can be
noted. In the doubt, a service contract must be taken near your reseller/installer or failing
this near our engineering services.
Contact your approved installer/reseller or our business
service for more information.
4) Identification and localization of the identification plate
Label of the manufacturer Serial number
Model of the product Product which can be recycled
Reference of the product Limitation of dangerous substances
Power supply range CE compliance
Maximum current input Country of the manufacturer
Protection class Manufacturer square code
Manufacturer identification Particular risks. Read the manual
Identification plate
Safety instruction sticker
8
9
10
11
12
13
14
1
2
3
4
5
6
7
1
2
3
4
5
6
8
10
11
7
13 14
9 12
HYDRO’Com
Ref:
HYD 70x0
90 - 240VAC 50/60Hz
www.syclope.fr Made in France
0,25 - 0,1A
IP65
S/N:
13044217