SYCLOPE electronic HYDRO'Com HYD 7000, Installation And Commissioning Instructions, Page: 10 / 36

Technical features and functions Page 10/36
Installation and commissioning instructions manual
III. Technical features and functions
1) Technical features
General characteristics
Type Specification(s) Mark(s)
Consumption 0,25A Maxi. (90VAC) to 0,1A Maxi. (240VAC) -
Power supply requirements Between 90 to /-10% -
Voltage category Class II
Temporary overvoltage
Accept temporary overvoltage from the power supply
system.
Electric protection Fuse 315 mA Time-lag 5x20 Miniature type TR5 F1
Maximum temperatures of
operation
-5 °C to 45°C -
Storage temperature -10 °C to 60°C -
Humidity Max. 90% without condensation -
Altitude Use lower than 2000m -
Material ABS -
Dimensions
Length : 190 mm (7.5 inches)
Width : 140 mm (5.5 inches)
Height : 70 mm (2.75 inches)
-
Weight 0,5 kg -
Protection rating IP 65 -
Entries
Measurement input 1 x 4… 20 mA current input generating 24VDC T°C
Control imputs 4x Isolated control input free of potential E1 to E4
Outputs
Relay outputs
4x Relays free of potential
Max. 2A/250VAC
S1 to S4
Communications
BRS485 Bus
1x Communication port RS485 type for compatible software
protocol type “MODBUS RTU” or “MODBUS ASCII”.
RS485
Modem (Option) 1x Slot for GSM or WiFi or Ethernet socket MODEM -
RS232 Ports
2x Communication port RS232C for connecting SYCLOPE
HYDRO ® controllers.
RS232-1
RS232-2
USB 1x USB port for memory stick USB
2) Temperature sensor ranges
Measurement and control
Parameter Range(s) Accuracy
T°C
-5 to 45°C ± 0,5 %
0 to 100°C ± 0,5 %