SYCLOPE electronic HYDRO'Com HYD 7000, Installation And Commissioning Instructions, Page: 24 / 36

Presentation and programming Page 24/36
Installation and commissioning instructions manual
7) Programming control inputs
This window allows to configure the four control inputs.
First, the user must choose of the type of entry needed.
On/OFF input is equal to a simple switch. It can be “ open ” or
“ closed ” .
Pulse input is equal to a “push button”. It starts a timer when
pushed.
• One pulse of minus 4 seconds activates a programmed
timer,
• One pulse over 4 seconds deactivates the entry.
Conditional input means to realize a “AND” function.
a. Case of ON/OFF input
The user chooses the function of the input.
He must define the active state of the switch. NO
(Normally open) or NC (Normally closed).
Then, the user associates the function to an output
relay.
b. Case of pulse input
The procedure is identical to the ON/OFF function. The
user must add the maximum time value of the activated
function.
c. Case of conditional input
The procedure is strictly identical to the ON/OFF
function.