E.
Radiant DryHeat Fusion:
•
To turn Radiant DryHeat Fusion on, simply highlight the Radiant function area using the motion buttons on the
control panel (see Figure 1).
•
To turn Radiant Heat on/off or to regulate the intensity, press
ENTER
and make your selections. Confirm your
selections by pressing
ENTER
.
•
Press
ESCAPE
to get back to the Program Menu.
CAUTION:
When using any setting of Radiant DryHeat Fusion, be sure to refrain from touching the upper portion of the inside of
the cabinet. The radiant emitters are located in this area and become very hot when the Radiant DryHeat Fusion feature is in use.
F.
Vibratory Bed:
•
There are different Vibratory Bed options available:
SPEED
or
PULSATING
.
•
The default vibration mode is
PULSATING
. To turn on vibration, simply activate the vibration function field
and press
ENTER
.
•
To control intensity in this mode, choose the
SPEED
control from the Vibratory Bed submenu and simply press
the
LEFT
or
RIGHT
buttons until your desired level is reached. Confirm your selections by pressing
ENTER.
•
To get to the
PULSATING
mode, choose
PULSATION
from the Vibratory Bed submenu and adjust the
pulsation interval by pressing the
LEFT
or
RIGHT
buttons until your desired interval is reached.
•
To turn OFF vibration in either mode, choose OFF from the Vibratory Bed submenu. Confirm your selection by
pressing
ENTER
.
G.
Face Air:
•
To turn on the fan, highlight the Face Air function field and press
ENTER
.
•
To control intensity in this mode, press
LEFT
or
RIGHT
buttons in the Face Air submenu until your desired level
is reached. Confirm your selections by pressing
ENTER
.
NOTE:
Your selections must be confirmed by pressing
ENTER
. If you press
ESCAPE
only, the default settings will be restored.
H.
Color Lights:
To choose different colors from the preprogrammed Color Light section, activate the Color Lights field
and press
ENTER
.
•
By choosing the Manual control you can select the desired color and confirm the selection by pressing
ENTER
.
•
With fading control, you can adjust the alternating interval time from one color to the next. If you are in program
11 (customized), you can adjust fading control of the 6 colors at intervals between 12-60 seconds. Selections are
confirmed by pressing
ENTER
.
I.
Aroma:
The aroma liquid diffusion system is located on the left side of the bed near the steam outlet. Aroma system dispenses
aroma liquid into the steam. If Steam function is OFF, aroma system will not dispense aroma liquid. Usually 1-2 oz. is
used per session, but usage depends on the selected program. To fill the aroma system, open aroma cap and add up to
200 ml into the aroma tank.
•
Aroma tank volume is 12oz (350ml).
•
Select the Aroma function from the Program Menu by pressing
ENTER
. Select
ON
from the submenu and confirm
your selection by pressing
ENTER
.
•
To turn off the Aromas, select OFF from the submenu.
•
To go back to the Program screen press
ESCAPE
.
•
To enjoy the benefits of aromas, fill the Aroma tank with recommended Oxygen Science
™
concentrates.
Oxygen Science concentrates are water-based concentrates.
NOTE:
Do not close the aroma cap with force – to avoid cap damage and allowing air flow to the aroma tank.
CAUTION NOTE:
Essential oils must NOT be used in the aroma system. Use
ONLY
the recommended concentrates. Use of pure
essential oils
WILL CAUSE DAMAGE
to the Aroma system (aroma tank, aroma valve, etc.) as well as to the entire unit.
S p a F e n g S h u i - P a g e 2 3
2 0 6 3 6 5 R e v. 8 0 9 U F S . 1 0 . 8 0 9 . 7. U
Owner’s Manual
SECTION 8 |
Operating: Radiant DryHeat, Vibration and Air
Spa Feng Shui Manual 809.qxp:DL_SFS_806 A4 NS 9/18/08 4:16 PM Page 27
