Operating Instructions
7
3. In the "
Application
" menu select the application and the vessel form, for
example storage tank.
4. Complete the adjustment in the "
Min. adjustment
" and "
Max. adjustment
"
menu points.
Example parameterisation
The radar sensor is a distance measuring instrument and as such measures the
distance from the sensor to the surface of the solids. To display the actual fill
level the measured distance must be assigned to the percentage height.
For this adjustment the distance must be entered for the minimum and maximum
fill level. If you do not know these values, it is also possible to make the adjustment
using distances, for example of 10 % and 50 %. The starting point for these
distance details is always the sealing surface of the thread or flange.
Further steps
1. Set the required damping of the output signal in the "Additional adjustments"
menu, "
Damping
" menu point.
2. Select the output curve in the "
Current output
" menu point.
This completes the quick start process. For further information see the section
entitled "
Parameterisation
".
2
1
100%
0%
1
m
(39.37
")
35
m
(1378
")
Fig. 3: Parameterisation example
1 Min. level
Δ
_
max. measuring distance
2 Max. level
Δ
_
min. measuring distance
