241
Starting Up
158
Inserting the batteries in the handset
The battery compartment is located on the rear side of the
handset. Open the battery compartment and insert the two 2
rechargeable batteries of the type AAA NiMH, 1.2 V 500 mAh.
Pay attention to the correct polarity.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, in-
sert it in the charging station for
at least
8 hours.
When the handset is inserted in the charging station properly,
you will hear a confirmation signal. The handset warms up dur-
ing the charging process. This is normal and does not repre-
sent a risk. Do not charge the handset with charging units from
other manufacturers. The current
battery charge status
is
indicated in the display:
Full
Empty
Setting the display language
Select the language required. Refer to Pages 168 and 170 for
the sequence of menu option selections.
HS:
>
HS setting
>
Language
>...
BS:
>
Base setting
>
Language
>...
There are 9 languages available for selection: German, French, Italian, English, Spanish, Portu-
guese, Dutch, Polish and Turkish.
Setting the date and time
The date and time are set using the menu; (
Set time
)
Page 167.
Confirm each entry for year, month, day, hour and minute individually by pressing the
or
key. Pay attention to the time and date format set;
Page 167. If the
12−hour
format is set, use
the
/
key to select whether the time set is before midday (A) or after midday (P).
Private branch exchanges
The information on Page 192 explains how to install your telephone in a private branch exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless tele-
phones in Standby mode when the handset is in the base unit. In talk mode, radiation is
reduced according to the distance between the handset and base unit.
Summary of Contents for DCT 587x Combo
Page 52: ...Notizen 52 Notizen...
