- Multiple mobile units -
104
9.1.3
Logging off mobile units
A mobile unit can only be logged off using another mobile unit that is still logged-on. It is therefore not possible to
carry out the logging-off procedure using the mobile unit that is to be logged off.
1.
Press the
button on the mobile unit.
2.
Select
the
SETTINGS
menu with
and
and confirm with
.
3.
Select
the
DEL HS
menu with
and
and confirm with
.
4.
Now select the number of the mobile unit to be logged off and confirm with the
button.
5.
Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0) and confirm with
. You can abort the process by pressing the
button. If the logging-off is successful, after a few
seconds you will hear a signal tone. The mobile unit is now logged off and can no longer be used for external
and internal calls.
9.1.4
Changing the PIN code
The logging on and logging off of mobile units is protected against unauthorised use by means of a PIN code. The
PIN code consists of four numbers. As supplied, the PIN code is set to "0000". To change the PIN code, proceed as
follows:
1.
Press the menu button
.
2.
Select
the
SETTINGS
menu with
and
and confirm with
.
3.
Select
the
PIN CODE
menu with
and
and confirm with
.
4.
Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0) and confirm with
.
5.
Now enter the new four-digit PIN code using the number pad and confirm with
.
6.
Now enter the new four-digit PIN code once more for confirmation and confirm with
.
7.
Now select further menu functions or exit the menu by pressing and holding the
button.
If the old PIN code is not entered correctly, the process will be aborted.
9.2
Making an internal call
When you have connected multiple mobile units to a base station, you will be able to make internal calls.
To do this, press the
button and then the number of the required mobile unit. The call is accepted with the
call button
on the mobile unit called.
If an external call comes in while you are making an internal call, you will hear a series of short signal tones and you
will see the number of the caller in the display, if this is available. End the internal call and accept the external call by
means of the
button on one of the mobile units.
Summary of Contents for D8525
Page 108: ...www switel com...
