− Operation −
101
5.7
Dialling phone numbers stored in the phone book
After phone numbers have been stored in the phone book (refer to Entering phone numbers in the phone book,
Chapter 8.1), they can be called quickly and easily.
1. Press the
button. The phone book entries appear in the display in alphabetical order.
2. Use the
or
button to scroll to the required name in the phone book.
NOTE:
To select an entry directly, press the corresponding button to enter the first letter of the name required.
To select the name Peters" directly, for example, press the
button once.
3. Press the
button and the selected phone number is dialled automatically.
5.8
Displaying the call timer
When a call is being made, the call time is indicated in minutes and seconds and the number of the person called
appear in the display after about 15 seconds.
5.9
Adjusting the receiver volume
The volume of the receiver can be adjusted according to requirements.
Press the
or
button during a call to set the volume to one of five levels.
5.10
Redialling
Refer to Dialled numbers (redialling)", Chapter 10.4.
5.11
Muting the handset
By pressing the
button during a telephone call, the microphone in the handset is deactivated. Secrecy"
appears in the display. You can then talk to someone else without the caller being able to hear you. The
loudspeaker in the handset remains switched on, so that you can continue to hear the caller.
Press the
button again to deactivate the muting function.
5.12
Switching the handset on /off
Press the
button for 2 seconds to switch the handset on and off. The display lights up or goes out accordingly.
5.13
Locating the handset (paging)
If you have mislaid your handset, you can locate it with the aid of the base station.
1. Press the Paging button
on the base station. All the handsets registered on the base station ring.
2. To stop the paging function, press the Paging button on the base station again or any button on the
handset.
5.14
Key lock
If you carry the handset around a lot, you can lock the keypad so that buttons are not inadvertently activated.
Calls can still be taken in the normal way even when the key lock function is activated.
5.14.1
Activating the key lock function
Press the
button on the handset for three seconds.
The Keypad locked" message and
icon appear in the display.
5.14.2
Deactivating the key lock function
To deactivate the key lock, press the
button and then press the
button again as confirmation.
5.15
Notes on range
The handset has a range of approx. 50 meters in closed rooms and approx. 300 meters outdoors. In the case of a
good connection to the base station, the
icon appears in the display.
NOTE:
If the handset is moved too far from the base station, the
icon flashes and acoustic warning signals
are issued. Move towards the base station, otherwise the call will be disconnected.
