− Base Station Settings −
119
14.5
Changing the system PIN
1. Press the
button.
2. Use the
or
button to select the Base settings" option in the display.
3. Press the
button. Several options appear in the display.
4. Use the
or
button to select the System PIN" option.
5. Press the
button. The message Enter old PIN" appears in the display.
6. Enter the old PIN (default setting: 0000). A
*
" appears in the display instead of the number actually
entered. If you enter an incorrect digit, delete it by pressing the
button.
7. When the old PIN has been correctly entered, press the
button. The message Enter new PIN"
appears.
8. Enter a new PIN (max. 8 digits possible).
9. Press the
button. The message Confirm new PIN" appears.
10. Enter the new PIN once again.
11. Press the
button. The assignment is confirmed in the display.
NOTE:
If you forget your PIN code, reset the telephone to its default settings (refer to Section 14.6).
12. Press the
button to move back one menu level at a time.
14.6
Resetting the default settings
NOTE:
After resetting the telephone to its default, factory settings, all the data entered is deleted.
1. Press the
button for 2 seconds. The handset is switched off.
2. Press the
button for 2 seconds. The handset is switched on.
3. Press the
button before the start screen appears in the display.
4. The message Default settings" appears in the display.
5. Press the
button. An acoustic signal is issued by the base station and handset as confirmation.
The telephone is then in the state it was in on delivery.
