− Private Branch Exchanges / Supplementary Services −
102
6
Private Branch Exchanges / Supplementary Services
The
button on the telephone is for use in private branch exchanges and when using supplementary services
provided by Swisscom.
6.1
R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the functions associated with the
button, such
as transferring calls, automatic call back, etc., can be used. A private branch exchange requires a recall time of
100 ms (refer to Chapter 14.4). The dealer where you purchased the exchange can provide information as to
whether the telephone will work properly with the exchange.
6.2
R button with supplementary services provided by Swisscom
Your SWITEL telephone supports the most important supplementary services provided by Swisscom (e.g.
brokering, call waiting, three−way conferencing, etc.). Supplementary services operate with a recall time of 300
ms (refer to Chapter 14.4 for settings). Please contact Swisscom with regard to enabling the the supplementary
services.
6.3
Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0") in order to obtain
the dialling tone for an outside line. When using some older private branch exchanges, it takes a little time before
the dialling tone becomes audible. With regard to these private branch exchanges in particular, it is possible to
insert an automatic pause after the number for the outside line so that the number can be dialled in a continuous
process without having to wait for the dialling tone.
After entering the number for the outside line and before continuing with the actual phone number, press the
button for approx. 2 seconds. P" appears in the display. A pause of
3 seconds is inserted between the number for the outside line and the actual phone number.
NOTE:
The pause can also be entered with the phone numbers in the phone book.
