7
FITTING THE GAUGE AND THE TONER CARTRIDGE
h
i
1- Remove the card bearing the gauge (h) from its aluminium
packaging.
- Detach the gauge mini-smartcard (i) from the card.
2. Open the cover housing the scanning assembly by
simultaneously pressing on the buttons located on
either side.
Locate the panel housing the gauge.
i
j
3. Slide the panel (j) open and position the gauge mini-
smartcard (i) in its housing ensuring that the contacts
are facing outwards.
4. Slide the panel back.
Ensure that the gauge mini-smartcard stays in
place while you slide the panel back.
5. Remove the toner cartridge from its aluminium
packaging.
Remove the strips of adhesive tape.
Gently shake the cartridge sideways 5-6 times to
distribute the toner evenly.
1
2
4
3
5
L
Unfurl the strip (L) of the black protective
sheath prior to fitting the photosensitive
drum.
4- Gently pull on the strip (L) of the black protective
sheath until the sheath has been completely
removed.
Should the black protective sheath tear, carefully
remove any remaining pieces.
3
4
L
