12
20406039en_ba_e0
• Do not insert the handset in the charging station without batteries.
• Do not use any other type of charging unit since this may damage the batteries.
The following symbols indicate the charging status on the handset display:
“full“
“1/2“
“empty“
Important!
Please note: after you have inserted the batteries for the first time, the battery display will
indicate the correct information on the charging status only after a complete charging cycle.
Use only approved rechargeable batteries NiMH AAA. Never use disposable
batteries/primary cells.
Approved models:
- NiMH AAA 750 from Hisund or
- KF-AAA750H from Kaifeng Batteries or
- 80AAAHC from GP Industrial
Note
• You can replace the handset in the charger after every call. Charging is electronically
controlled to ensure optimal charging of batteries in different charge states. Avoid
removing the batteries from the handset for no good reason, since this affects the
optimum charging cycle.
• Because your telephone is fitted with a low-radiation mechanism, the antenna auto-
matically switches off in standby mode and cannot therefore emit any radiation. Your
telephone is delivered with this function switched on.
• You can telephone for up to 12 hours with fully charged batteries. The handset has a
standby time of up to 150 hours.
• If the battery charge status has reached its lower limit, the battery symbol (
) flashes
in the display and a warning signal is heard. You have only a few minutes of talk time
left.
Summary of Contents for Rousseau 300
