SWIR Acuros CQD Series, User Manual, Page: 65 / 121

User Manual
Acuros
®
CQD
®
Camera
65 | P a g e
f. Set “BulkParity” to “None” ( PvGenParameterArray::SetEnumValue("BulkParity",
“None”))
g. When you open the serial port using PvDeviceSerialPort::Open, make sure to choose
PvDeviceSerialBulk0 (PvDeviceSerialPort::Open(UARTDeviceAdapter,
PvDeviceSerialBulk0)
Once the above steps are complete, the UART Command Descriptions in Section 10.3.4
can be used to find the command format for changing the camera registers.
3. GenICamParameters: Demonstrates how to get GenICam parameters which need to be
changed in some cases when camera registers are changed via UART (Width, Height,
Binning).
10.3.2 Helpful Pleora weblinks:
1. https://supportcenter.pleora.com/s/topic/0TO34000000PW53GAG/ebus-player
2. https://supportcenter.pleora.com/s/topic/0TO340000004X6dGAE/ebus-sdk
10.3.3 Driver compatibility
1. Linux: Our custom SVS GUI is not Linux compatible but the Pleora eBus SDK can be used as an
interface between the two.
2. The user can create their own Linux compatible GUI using the Pleora libraries and Acuros CQD
specific UART commands.
3. Additional driver compatibilities (Cognex, MV, Labview) are currently under development.
10.3.4 Pleora Firmware Update
1. Connect camera to host machine. The SVS ImagIR software is not needed.
2. Turn off the host PC firewall(s).
3. Open Pleora Firmware Updater (installed with the eBus SDK) in the folder: C:\Program
Files (x86)\Common Files\Pleora\eBUS SDK.