![background image](http://html1.mh-extra.com/html/swift/m29tz/m29tz_use-and-care-manual_1413902024.webp)
23
This will open the Motic Live Imaging Module help file, containing the full help menu:
USING MOTIC IMAGES 3.0 SOFTWARE WITH THE BTW CAMERA
To connect the BTW camera (USB Mode) to a computer or laptop, you will need to download and install Motic Images 3.0,
and purchase separately, an optional A-Male to Mini-B USB 2.0 cable (Available from any electronics website or retail store).
1.
Download and install Motic Images 3.0 from the Motic website.
2.
The Motic Images 3.0 is constantly updating, so please check the Motic Website for updates. Registration is
necessary. Use the DM number located on the sticker, on the software sleeve.
3.
Switch your camera to USB mode.
4.
Plug the Mini-B end of your USB cable into the camera.
5.
Plug the flat A-Male end of your USB cable in the computer.
6.
The drivers for the camera should load automatically.
7.
Once the drivers have installed, open the Motic Image 3.0 Software.
8.
Click File, then scroll down to Capture.
9.
This will open the Motic Live Imaging Module.
10.
Your image should automatically display on the screen.
11.
By default your live image is 3MP or 2048 x 1536 resolution.
12.
MOTIC IMAGES 3.0 SOFTWARE
The Motic Images 3.0 software, like the Motic Images 2.0 software will allow you to view, capture, annotate and save your
images. For further assistance in using the Motic Images 3.0 software please refer to the Motic Help files. These files will
help explain the functions of software. There are help files for both the main Motic Images software window, as well as the
Motic Images Live Imaging window.
MOTIC IMAGES 3.0 HELP GUIDE
To access the Motic Images 3.0 help menu, click on Help, located at the top of the Motic Images software screen.