10
TABLET ACCESSORIES
HDMI Cable
This cable will enable you to connect to an HDMI ready device, to
view your tablet on a larger format. The displayed image will
replicate the displayed image of the tablet.
Power Adapter
This 5V DC power adapter is for charging your tablet’s battery. It is
also used to power the camera in WiFi mode.
Calibration Slide
This slide will enable you to calibrate your tablet to your microscope,
for accurate measurements. You do not need to calibrate your
microscope in order to begin using your table/microscope.
C-Ring
This ring is used between the camera and c-mount to achieve par-
focus. Pre-installed on MA15602 – C-Mount.
4GB Micro-SD
This storage card can be used with your tablet to store images and
then transfer them to your computer. This card is provided as a
courtesy and cannot be replaced. *32GB Max Supported*
Mini USB to Micro USB
Provides power and feed connection between the tablet and camera.
To operate the camera, move the switch to the camera position.
USB to Micro USB
This cable when used in conjunction with the power adapter is used to
charge the tablet.
USB to Mini Power Din
This cable is used to power the camera, in WiFi mode. This cable
can also be used to charge both the tablet and camera at the
same time. Keep plugged into camera at all times, if possible.
L-Wrench
Optional Wrench for mounting bracket to Motic branded trinocular
microscopes
Please Note: Items included may differ in
appearance from items pictured above
