©
2021 SwellPro Technology
Co., Limited 17
Refer to the above figures to connect the intelligent battery and charger. Press the
power button to turn on the intelligent battery, and the battery will enter the charging
state.
The battery needs to turn on for charging.
Installing the Intelligent Battery
The Intelligent battery is quick and easy to change. Ensure the battery is OFF before
inserting or removing it from the drone.
3.
Unlock and open the
waterproof hatch
4.
Slide in the fully charged
intelligent battery and
push it into the battery
slot.
3. Close the battery hatch.
Fasten the catch and then
lock the hatch.
⚠
Always check to ensure that the waterproof seal on the hatch door is clean and
lightly lubricated.
⚠
The drone is no longer waterproof when the battery hatch is open. Do not allow
water or sand to enter the drone while the battery hatch is open.
⚠
The Appendix of this manual contains additional warnings and precautions
regarding the batteries, safety, charging, and maintenance. Please ensure you
familiarize yourself with all this information to get the most from your purchase.
Low Battery Warnings
The SplashDrone 4
has two low battery warnings to help the pilot manage the drone’s
battery life. Each time a battery level alarm is activated, the remote controller will beep
and vibrate to alert the pilot.
