32 ©2021 SwellPro Technology Co., Limited
4.
The silicone plug on the back of the remote controller is closed.
5.
The mobile device is securely mounted to the remote controller.
6.
Place the aircraft on flat open ground or water.
7.
Power on the remote controller, followed by the drone.
8.
Connect the mobile phone to the remote controller Wi-Fi.
9.
Open the APP and wait for the camera image to appear and the flight data display is
normal.
10.
Check the following flight data: Battery capacity > 16.0V; Remote controller battery
power > 1 bar; Satellite > 5.
11.
For your safety, you should stand upwind and at least 3 meters away from the drone.
12.
Novice pilots should always take off in GPS mode.
13.
Arm the drone or use the auto take-off on the APP.
14.
Push the left(throttle) joystick up slowly, allowing the drone to take off smoothly.
Release the throttle when the drone is approximately 1.5 m high. Allow the drone to
hover for a moment to ensure flight stability.
15.
When you need to descend, gently pull down the left(throttle) joystick, allowing the
drone to descend and land on a flat surface or the water.
16.
After landing, keep the left(throttle) joystick down to its lowest position for 3
seconds until the motors stop, or you can use the disarm joystick command to stop
the motors.
17.
Stop video recording before shutting down the drone, otherwise, the video file may
be damaged.
Starting/Stopping Motors (Arming the Drone)
Before starting the drone, take the following precautions:
1. Place the aircraft in an open area 3 meters away from yourself and others.
After the aircraft is powered on, the system will conduct self-checking. After the self-
checking is completed, it will sound a confirmation tone.
2. In GPS mode, if the satellite signal of the aircraft is poor, the remote controller will
vibrate when unlocking, and the display will prompt "GPS signal is poor, unable to
unlock". The motors will not unlock.
3. Unlocking in ATTI mode is not affected by GPS signal strength. However, it is not
recommended for novice pilots to fly without GPS coverage.
4. In Custom mode, the motors cannot be unlocked.
Starting (Arming) Motors
Remote controller
operation
Description
Pull both the left and right joysticks simultaneously
down and inwards and maintain this position for 3
seconds. The motors will be unlocked and start rotating.
