©
2021 SwellPro Technology
Co., Limited 33
Stopping Motors (Emergency Stop)
Remote controller
operation
Description
Method 1: After the aircraft has landed on the ground or
water surface, pull the throttle to the lowest position,
and hold for 3 seconds. The motor will be lock and stop
rotating.
The recommended method for stopping motors.
Method 2: Pull both the left and the right joysticks
downwards and outwards. This method can be used as
an emergency stop.
⚠
Stopping the motors in flight may cause the drone to
crash and should only be carried out in an emergency
when stopping the motors will minimize potential
damage. (For example, there is a risk that the drone may
hit people or crowds)
Water Takeoff and Landing
1.
When taking off from choppy water, ascend quickly from the surface to prevent the
drone from being affected by a passing wave.
2.
When landing on water, descend vertically to the surface. If the drone lands with
horizontal speed, it may flip and be inverted. The flight controller will shut down the
motors if the drone becomes inverted on the water.
⚠
Do not leave the drone floating inverted for more than a few minutes. Flip the
drone using the Power-Flip command or recover the drone as soon as possible to
avoid water saturating the waterproof barometric membrane.
Boat Takeoff and Landing
•
There should be enough space for the drone to take off or land on the boat.
•
If there is not enough space on the boat, take off and land on the water can
otherwise be a safer, alternative option, as there is sufficient space for the drone to
operate.
