28 ©2021 SwellPro Technology Co., Limited
•
During the flight, try to maintain the line of sight with the drone, keep away from
obstacles and people.
•
Avoid flying near areas with high electromagnetic interference such as power lines
or signal towers to minimize the risk of interfering with the remote controller of the
drone.
•
Fly below 4000 meters above sea level as environmental factors including air
density and wind shear reduce the performance of the aircraft and battery.
•
Before flying in low temperatures, warm the battery to ~25
℃
to maximize flight
time.
•
Although the SplashDrone 4 is waterproof, do not fly in fog or strong wind
conditions. (For wind speed exceeding 20 m/s, or above Beaufort Force 8)
Flight Restrictions
According to provisions of the International Civil Aviation Organization and many
national air traffic regulations, drones must be operated in specified airspaces. By
default, the SplashDrone 4 is configured to not exceed an altitude of 120m the Home
Point altitude.
If you need to cancel the safety fence, please set the flight altitude to 0 through the
SDFly app.
Pre-Flight Checklist
•
Intelligent batteries, remote controller, and your mobile devices are fully charged.
•
Check all propellers are in good condition and correctly installed.
•
Manually rotate the 4 motors to ensure they can spin smoothly.
•
Make sure the waterproof barometric membrane is not damaged.
•
Make sure all the connector sealings are tightly sealed with the rubber rings
attached, include the battery sealing, all the base connector ports. Make sure the
sealings are free of dirt, sand, and other debris.
•
All the payload modules are tightly mounted to the aircraft.
•
Micro SD card has been inserted and tightly sealed.
