Swegon CONDUCTOR W1, Technical Manual

Page: 39 / 63

4 : 39
The menus of the room unit
Calibrate temperature
Language
<Exit Select>
FirstTime func
Temp. calibration
....
....
....
....
....
..
Temp. calibration
<Exit
[0,0]
Figur 14. Image for selecting calibrate temperature and the Temp. calibration image .
The purpose of the Calibrate temperature action is to ensure that the
temperature reading is in agreement with the actual room temperature.
1. Go to the Service menu.
2. Highlight Settings
3. Press OK or press on the
►
Right key..
4. Highlight Temp. calibration.
5. Press OK or on the
►
Right key.
6. Change the number of degrees to which the temperature reading
should be adjusted.
• Increase the number of degrees by pressing the
▲
UP key.
• Decrease the number of degrees by pressing the
▼
DOWN key.
7. Press OK to confirm the calibration and return to the Settings menu.
8. Return to the Service menu by pressing the
◄
Left key.
Show system information
Settings
<Exit Select>
Info
General Param.
....
....
....
....
....
..
Room temp.
RE RF id
Battery Level .
<Exit
22,0 C
23456
5.2V
Figur 15. Image for selecting Info and the first image in System information.
1. Go to the Service menu.
2. Highlight Info.
3. Press OK or on the
►
Right key.
Current information for the application is shown in the System
information images. Navigate between the images by pressing the
▲
UP
or
▼
DOWN key.
4. Return to the Service menu by pressing the
◄
Left key.