Swecoin TTP 5200, Service Manual

Page: 50 / 52

TTP 52x0 Series Kiosk Printer — Service Manual December 2001 48
5.1 Versions
The logic diagrams and component placement shown in this manual is for the 00728-002
version of the board. Below you find an overview of the differences between these and the
other versions available.
00728-001
Corresponds to the 00728-002 logic diagram with the following exception:
•
RAM capsule U5 (sheet 1, drawing pos. 2D) is not installed.
00728-002
This is the board that is on all the logic diagrams in this manual.
00728-003
Corresponds to the 00728-002 logic diagram with the following exceptions:
•
5 Vdc voltage regulator U9 (sheet 3, drawing pos. 3B) is installed
•
Capacitor C66 (sheet 3, drawing pos. 3A) is not installed.
00728-004
Not used in TTP 52x0 printers
00728-005
Corresponds to the 00728-003 logic diagram with the following exceptions:
Parallel and serial connector equipped with strain relieves
00728-006
Corresponds to the 00728-002 logic diagram with the following exceptions:
Parallel and serial connector equipped with strain relieves