Swecoin TTP 5200, Service Manual

Page: 23 / 52

December 2001 TTP 52x0 Series Kiosk Printer— Service Manual 21
4 SPARE PARTS
Items coded SP are standard spare parts.
1. Screws, washers, nuts etc. are available in a common hardware store, and are
thus not supplied as spare parts.
2. Parts that are considered as not being worn by normal printer use are not spare
parts, for example the printer chassis.
Should you require any of these "non-spare parts", contact Swecoin for advice. Other
price and delivery conditions may apply for non-coded items.
Standard hardware
Designation
example How to interpret the designation Illustration How to
measure
Screw MRX-H M3x5 Panhead screw. Thread: M3. Length: 5 mm
Screw MFX-H M3x6 Countersunk screw. Thread: M3. Length: 6 mm
Screw M6S M6x16 Hex head screw. Thread: M6. Length: 16 mm
Screw MC6S M6x12 Allen-head screw. Thread: M6. Length: 12 mm
Screw FXS-H ST
2.9x6.5
Countersunk Screw. Self-threading.
∅
2.9 mm. Length:
6.5 mm
Screw, RXK-H ST 2.9x8
Panhead screw, Self-threading.
∅
2.9mm. Length:8 mm
Screw RTK ST 2.9x6.5
Torx panhead screw, Self-threading.
∅
2.9mm. Length:
6.5 mm
Nut M6M M2 Hex nut, M2 thread
Length
DO NOT OVER-TIGHTEN THE SCREWS!
The max torque for the different screw sizes are as follows:
M2 = 0,13 Nm
M2.5 = 0,26 Nm
M3 = 0,46 Nm
M4 = 1.1 Nm
Threadlock like Locktite 243 should be used on screws that hold plastic parts, for instance
the screws for the micro-switches.