Swecoin TTP 5200, Service Manual

Page: 21 / 52

December 2001 TTP 52x0 Series Kiosk Printer— Service Manual 19
3.3.7 Presenter module
REMOVAL
1. Separate the upper and lower chassis modules. See Section 3.3.2 page 14.
2. Disconnect all cables from the control board.
3. With the upper chassis module standing on its front, remove the three lower screws.
Figure 9. Preparations for removing the presenter module
4. Open the cable clip at the back of the printer front. See figure below.
5. Put the upper chassis module back to normal position and remove the two upper
screws at the front of the upper chassis module.
Figure 10. Loosening the presenter module
6. Remove the presenter module.