Swecoin TTP 5200, Service Manual

Page: 19 / 52

December 2001 TTP 52x0 Series Kiosk Printer— Service Manual 17
3.3.6 Cutter module
REMOVAL
1. Separate the upper and lower chassis modules. See Section 3.3.2 on page 14.
2. Disconnect all cables from the control board.
3. With the upper chassis module standing on its front, remove the two uppermost
screws from the underside of the module.
Figure 6. Loosening the cutter module
4. Remove the cutter module assembly.
SW96147C
Screws
Cutter Module
Figure 7. Lift the cutter module up after removing the screws.