Setup
7
SwannEye IP Camera
3.
Product Layout
3.1.
Front view
Light Sensor
Light Sensor detects low light and
switches to night vision
Infrared LEDs
These allow the camera to achieve
night-vision up to 33ft/10m.
Network Activity
LED
This will flash when there is
information being sent over a
network to or from the camera,
either wired or wireless.
CMOS Lens Sensor
The lens is fixed and cannot have its
focus manually adjusted.
Built-In Microphone
Lets you listen remotely to activity
near the camera.
3.2.
Rear View
Audio output socket Connect speakers or headphones
to this socket to hear what is being
captured by the cameras internal
microphone.
RJ45 (Ethernet)
socket
RJ45 10/100 Base-T plug. Connect
the camera to your network router
here.
DC5V/1.5A socket
Connect the supply here.
Antenna mount
Connect the WiFi (wireless)
antenna here to achieve wireless
communication.
Alarm I/O Block
For connecting external alarms and
sensors.
Speaker
(not pictured)
The camera features a built-in
speaker - it’s located inside the case,
near the Alarm I/O Block.
RJ45
Power LED
Light Sensor
Microphone
DC5V
Antenna
Mount
Reset Button
Network
Activity LED
Audio Alarm
I/O Block
Infrared
LEDs
