Setup
13
SwannEye IP Camera
6.1.1. Device Information
Some basic information is provided such as Device name and the System/App
Firmware Version numbers.
6.1.2. IP Config
This page is used to configure the network settings.
Set IP Automatically (Recommended)
: Check this box to obtain an IP address
from the DHCP server. The camera needs to be connected to a router via ethernet
(LAN) cable and the router needs to have DHCP capabilities.
To trigger this selection, you will need to enter the username (default:
admin
)
and password (default:
123456
) and click
Update (F5)
and
Yes
to confirm. The
camera will reboot and when restarting, will attempt to get an IP address from
the DHCP server.