Swann DVR16-8600 Combo User Manual Download

Page: 35 / 117

Digital Video Recorder User Manual

3.3.5 Alarm Recording

This unit supports recording channels and PTZ linking after alarm.

STEP1

Enter ALARM configuration, see Fig 3.13 Sensor Alarm Setup. Select cameras

Fig 3.13 Sensor Alarm Setup

STEP2

Enable Detection first. Set Device type.

STEP3

Enter Trigger configuration. Set alarm out, recording cameras and linked PTZ, referring to 3.3.4 Motion

Detection Recording STEP4-5

STEP4

Set Alarm in hold time. It is the interval time between the two adjacent efficient alarms. This is similar with

Hold time in MOTION configuration.

STEP5

Set Alarm out hold time and Buzzer hold time. Click OK to save settings

STEP6

Enter SCHEDULE configuration. Select Sensor and relative cameras to set, referring to 3.3.3 Timer

Recording.

Notice: About preset and auto cruise, users can only select one at same time.

The actual post alarm record time equals Hold time in RECORD and Hold time in MOTION

Summary of Contents for DVR16-8600 Combo






















































































































Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands

Swann DVR16-8600 Combo, User Manual

Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands