Swann DVR16-8600 Combo User Manual Download

Page: 83 / 117

Digital Video Recorder User Manual

Fig 6.1 View with IE browser

Notice: If HTTP port is not 80, other number instead, need add the port number after IP address. For example, set HTTP port as 82, need input

IP address like 192.168.0.25:82.

User name and password here are the same with that used on the DVR. The default is admin and 123456.

6.1.2 On WAN

There are two ways that the DVR is connected to internet.
1. connect the DVR to internet through a router or virtual server.

STEP1

Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router.

STEP2

Enter Video to set network video parameters like resolution, frame rate etc.

STEP3

Forward IP address and port number in Virtual Server setup of the router or virtual server. Close firewall.

Notice

Forwarding block may be different in different routers and server, please check your router manual.

STEP4

If users want to utilize dynamic domain name, need apply for a domain name in a DNS server supported by the

Summary of Contents for DVR16-8600 Combo






















































































































Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands

Swann DVR16-8600 Combo, User Manual

Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands