Swann DVR16-8600 Combo User Manual Download Page 74

Page: 74 / 117

Digital Video Recorder User Manual

STEP1

Plug an USB flash to the computer. Copy the firmware to the flash. The extension of firmware is tar.

STEP2

Remove the USB flash to the DVR. Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.

STEP3

Click Update. A window will appear, which reminds users that it will automatically load default settings after

update.

STEP4

Press OK to begin. The process bar will display on the screen during update.

STEP5

After finished, the unit needs to be restart.

Notice: If a “no device or no file” error appears, it is possible that the USB device is incompatible. Please change an USB flash.

Please be patient to wait. It will take 2-3 minutes to update.

5.3 Load Default Setup

The DVR has different setup blocks, like Basic, Record, Schedule, Motion etc. Users can choose any block to do

default, as Fig 5.2 Reset Blocks.

Fig 5.2 Reset Blocks

Summary of Contents for DVR16-8600 Combo






















































































































Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands

Swann DVR16-8600 Combo, User Manual

Search results

Summary of Contents for DVR16-8600 Combo

Reviews:

Related manuals for DVR16-8600 Combo

Brands by name

Popular brands