SVP UDT-02, Manual

Page: 53 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0
53
4.6.1.17 Encoder Output
The encoder output option allows the configuration of the transport stream
bitrate. When you use the transmitter’s ASI output, the output bitrate can be
set manually on this screen. When the RF is enabled, the modulator starts
working and the output bitrate is set by the modulation parameters, changing
automatically to Auto mode.
Figure 4.20: Encoder Output Menu
Line nº Function
1
Bit Rate (eligible parameter):
In this field, the output bitrate is shown. When it is wanted to select
between an automatic bitrate or configure manually the bitrate,
press Right, Left buttons. If manual configuration is selected then,
press OK button to select the desired bitrate with the UP, Down keys.
Press the OK button to save the introduced value.
The available options are:
•
Auto
• Manual (editable parameter)
Figure 4.21: Encoder Output menu options
If the user selects the manual option, the first and second lines disappear
on the main screen.
When the encoder output is in Manual, if you activate the RF, the encoder
output changes to AUTO mode automatically.