SVP UDT-02, Manual, Page: 7 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0
7
Important Notes
•
The UDT-02 HEVC UHD Multiband Transmitter is completely compatible
with the DVB-T/T2 Standards, included in the European Standard ETSI
EN300744 (DVB-T) and ETSI EN300755 (DVB-T2).
•
It is important to note that when the transmitter is switched on, the
selected RF output connection must be connected to a suitable antenna
or charged.
• It features HEVC, H.264 and Mpeg-2 encoding for 12G, high definition
(HD) and standard definition (SD) signals with ultra-low latency. HEVC
allows the same video quality, reducing file sizes by up to 50% compared
to its predecessor, the H.264.
•
The UDT-02 HEVC UHD Multiband Transmitter is available from 1 GHz
to 8 GHz, for the DVB-T2 and DVB-T.
•
The equipment’s maximum output power for the DVB-T2/T is 100 mW
in 2 GHz frequency band, (selectable from -5 to +20 dBm).
•
Special care should be taken with SDI cables, quality and length, as
these are very important, especially when 12G signals are transmitted.
•
If any Audio or data channel are not used in a transmission, they should
be disabled, in order to assign that bitrate to the video and achieve a
higher quality transmitted video signal.
•
Only authorized personnel should open the unit and any repair or
warranty will be invalidated if the seals are broken.