SVP UDT-02 Manual Download Page 141

Page: 141 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0

141

Annex A:

PA Standard and PA Ultralinear Power

Amplifiers

Important Notes

Read the instructions carefully before connecting the machine.

In our effort to improve our products constantly, we may change their

specifications without prior notice.

Use high quality, low loss cables and connectors to ensure proper

functioning of the equipment’s features.

This equipment is to be installed and operated by qualified personnel

only.

The equipment has a two-year warranty that covers any failure or

manufacturing defect, providing it is not handled by anyone other

than SVP Broadcast Microwave personnel and the warranty seal has

not been broken.

Summary of Contents for UDT-02






































































































































































Search results

Summary of Contents for UDT-02

Reviews:

Related manuals for UDT-02

Brands by name

Popular brands

SVP UDT-02, Manual

Search results

Summary of Contents for UDT-02

Reviews:

Related manuals for UDT-02

Brands by name

Popular brands