SVP UDT-02, Manual, Page: 78 / 165

UDT-02 UHD HEVC Digital Camera Transmitter
MANUAL V1.0
78
Figure 4.35: Unit Remote Menu
Line nº Function
1
Local IP (editable parameter):
In this option the IP address of the device can be set in the case that
it is wanted to control the device remotely. To change the IP address
first press OK button and then, with the Up and Down keys select
the desired number. To change from one character to another, press
Right and Left keys. Press the OK button to save the introduced
value.
2
Subnet Mask (editable parameter):
Here the Subnet Mask address of the device can be written. To
change the Subnet Mask address first press the OK button and then,
with the Up and Down keys select the desired number. To change
from one character to another, press Right and Left keys. Press the
OK button to save the introduced value.
3
Gateway (editable parameter):
In this option, the address of the Gateway must be written. To
change the Gateway address first press OK button and then, with
the Up and Down keys select the desired number. To change from
one character to another, press Right and Left keys. Press the OK
button to save the introduced value.
4
MAC ADDRESS (reading parameter):
The MAC address of the device is shown.
5
Admin Pass (editable parameter):
The administrator’s password is introduced. An own password, which
is a list of 8 digits, can be set.
To set the password, press the OK button and then use the Up and
Down button to establish the desired value. Press Right and Left
buttons to change other digits. Finally press the OK button to save
the introduced values.
6
Restore Admin Pass:
This option enables you to restore the default administrator
password (00000000).