3/30
ALFA IN a.s ©
www.alfain.eu
1. INTRODUCTION
Dear consumer,
ALFA IN a.s. Thank you for purchasing our product and we believe that you will
be satisfied with our machine.
The SVAROG 105 PLASMA CNC machine is designed for cutting metals on the
basis of modern technology of material cutting by means of a thin jet of plasma
gas. This technology has several advantages over other methods
1. High cutting speed
2. Quality cut with a minimum area of the changed material structure
3. Smaller thermal deformations of the cut material
4. Possibility of cutting carbon and high-alloy, stainless steels and non-
ferrous metals
5. The method does not require any special gases
6. Lower costs
SVAROG 105 PLASMA CNC is equipped with a proportional valve that allows
precise setting of the required working pressure of the gas and display of the
pressure value on the display. The proportional valve allows you to precisely set
the required pressure or gas flow and allows high accuracy and stability of
cutting. The machine is equipped with the ecological function "fan on emand". If
cooling is not required, the machine automatically shuts off the fan.
SVAROG 105 PLASMA CNC is designed for high-quality cutting of materials
up to 40 mm thick mild steel. Productive cutting of carbon steel can be to a
thickness of 32 mm. At lower demands on the quality of the cut can be cut
through (separate) the material thickness to 50 mm. Maximal piercing is 22 mm
(mild steel). For more data see TECHNICAL DATA.
We reserve the law of adjustments and changes in case of printing errors,
change of technical parameters, accessories etc. without previous notice. These
changes may not be reflected in the manuals for use in paper or electronic form.
