29/30
ALFA IN a.s ©
www.alfain.eu
18. STATEMENT OR WARRANTY
1. In accordance with the warranty periods stated below, ALFA IN guarantees
the proposed product to be free from defects in material or workmanship
when operated in accordance with the written instructions as defined in this
operating manual.
2. ALFA IN products are manufactured for use by commercial and industrial
users and trained personnel with experience in the use and maintenance of
electrical welding and cutting equipment.
3. ALFA IN will repair or replace, at its discretion, any warranted parts or
components that fail due to defects in material or workmanship within the
warranty period. The warranty period begins on the date of sale to the end
user.
4. If warranty is being sought, please contact your ALFA IN product supplier for
the warranty repair procedure.
5. ALFA IN warranty will not apply to:
a) Equipment that has been modified by any other party other than ALFA
IN’s own service personnel or with prior written consent obtained from
ALFA IN Service Department.
b) Equipment that has been used beyond the specifications established in
the operating manual.
c) Installation not in accordance with the installation/operating manual.
d) Any product that has been subjected to abuse, misuse, negligence or
accident.
e) Failure to clean and maintain (including lack of lubrication, maintenance
and protection), the machine as set forth in the operating, installation or
service manual.
6. Within this operating manual are details regarding the maintenance
necessary to ensure trouble free operation.
7. Validity condition of warranty is, that the cutting machine must be used only
with the torch, which is said in this manual.
NOTE
Warranty repairs must be performed by either an ALFA IN Service Centre, an
ALFA IN distributor or an Authorised Service Agent approved by the company
ALFA IN.
8. As a warranty list serves proof of purchase (invoice) on which is the serial
number of the machine, eventually a warranty list on the last page of this
manual.
